How To Clean Elvie Pump?

clean elvie pump

The Elvie breast pump is a possibility to think about if spending hours a day tethered to a wall while pumping sounds like something you’d like to avoid. However, how is the Elvie pump cleaned? You can easily clean your Elvie pump! All you need is some soap and some warm water. Please continue reading if you want to learn more about how to clean the Elvie pump.

How Do You Use Elvie Pump?

If you haven’t used your Elvie Pump before, spend some time reading the manual to become familiar with the names of each component. Three components make up each unit: 1) the Hub (which houses the electronics and actual pumping mechanism/motor), 2) the detachable milk bottle with spout and valve, and 3) the breast shield and seal for your nipple and breast.

You should also download the Elvie app, which enables you to track the pumping history for each breast, view real-time milk volume data, and remotely operate the pump.

When putting together the Elvie Pump for use:

  1. Attach the Seal to the Breast Shield, using the tabs as guides
  2. Push the Breast Shield into the Hub
  3. Twist and click the Spout onto the Bottle
  4. Push the Valve onto the Spout
  5. Click the Bottle onto the Hub

The device’s other manual controls, including the play/pause button, two intensity buttons, and a left/right side selector, are also illuminated when the power button is pressed. You can also use the app to control pump settings after manually turning it on.

Don’t worry if it takes you a few attempts to get your breast and nipple aligned properly. Elvie has some great visuals and advice on pages 28-30 of the instructions, so you’ll be a pro in no time.

You should stop pumping when:

  1. Press Play / Pause to stop pumping
  2. Unclip your nursing bra and use your finger to break the seal that formed around your nipple
  3. Remove Elvie Pump from your bra
  4. Press Power to switch off

As an alternative, the Elvie Pump will stop pumping once the bottle is full.

How Can Elvie Pump Be Cleaned?

clean elvie pump

The best way to clean an Elvie pump may vary depending on the type of pump and the material it is made of, so there is no universal solution to this problem. It is possible to share a few general pointers, though.

In order to properly clean your Elvie pump, always refer to the manufacturer’s instructions first. The majority of pumps can be cleaned with warm water and mild soap, but some may need a particular kind of detergent or disinfectant.

  1. Remove the battery from the Elvie Hub and unplug it from the wall outlet before cleaning it.
  2. Then, gently wipe the entire surface with a soft, lint-free cloth.
  3. Finally, dry the Hub off with a dry cloth.

Keeping The Elvie Pump Charged

If you pump at the recommended settings, your Elvie Pump should last approximately 2.5 hours.

The Battery Light will turn red when the battery is low; if the battery is completely empty, the Elvie Pump will shut off automatically.

Elvie Pump can be connected to a USB power source, such as a phone charger or computer USB port, using the charging cable that is included. The pump’s light turns green when it is fully charged, which takes about two hours.

Charge your pump as soon as you’re done using it if the low battery indicator is on to avoid missed pumping sessions (or worse)!

How Can Breast Pump Components Be Cleaned Without Water?

According to Dr., you can still maintain cleanliness even without a fridge or running water. Using a sanitizing spray or wipes made specifically for cleaning pump parts, Wexler wipes off any breast milk between pumping sessions. (Medela makes a line of cleaning supplies designed especially for use with pumps.)

manufactured from a tough, clear plastic that won’t deteriorate or lose its gloss. The dishwasher, microwave, fridge, and freezer are safe.

Simply wash Elvie Trainer and the optional cover before and after every use with warm water and mild soap. Before putting it back in the carry case, don’t forget to give it a thorough rinse and make sure it is completely dry. Just use a damp cloth to wipe out the carry case’s interior to clean it.

How Does Boiling Water Sterilize A Breast Pump?

Boil water in a pot until it is full enough to cover all the components. Put the parts in the boiling water for 10 minutes. Let the water cool before using tongs to carefully remove any parts. Place the parts on a clean surface or a towel after you’ve finished sanitizing so they can dry naturally.


Elvie is ideal for mothers who are always on the go and need a pump that is hardly noticeable. Elvie Pump cleanup is simple. For cleaning the inside of the Pump and the tubing, the device is supplied with a small brush. The pump can also be cleaned with running water.

Leave a Reply

Your email address will not be published.